Milestone XProtect Advanced VMS 2014 - Manual (Page 216)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 216 Management Client elements
Name Description
When adding new camera
devices automatically enable:
Generate motion data for
smart search
Generation of motion data for smart search requires that motion
detection is enabled for the camera.
Select the check box to enable generation of smart search motion
data on new cameras, when you add them to the system with the
Add Hardware wizard.
This setting does not affect motion detection settings on existing
cameras.
You enable and disable the generation of smart search motion data
for a camera on the Motion tab for the camera device.
When adding new camera
devices automatically enable:
Multicast
Select the check box to enable multicast on new cameras when you
add them with the Add Hardware wizard.
This setting does not affect multicast settings on existing cameras.
You enable and disable live multicasting for a camera on the Client
tab for the camera device.
Language
Select the language of the Management Client.
Restart the Management Client to use the new language.
Recording server
Name Description
Timeout for PTZ sessions
Client users with the necessary user rights can manually interrupt
the patrolling of PTZ cameras. Select how much time should pass
before regular patrolling is resumed after a manual interruption. The
setting applies for all PTZ cameras on your system.
Ignore device communication
errors if communication
reestablished before Select for how long a communication error may exist before the
system logs it as an error and triggers the Communication Error
event.
Server Logs tab (options)
On the Server Logs tab, you can specify settings for the system’s management server logs.
See also About logs (on page 205) for more information.
Name Description
Logs
Select the log that you want to configure:
 System Log
 Audit Log
 Rule Log