Milestone XProtect Advanced VMS 2014 - Manual (Page 70)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 70 Management Client elements
This means that you may need to move devices and any not yet archived recordings that they have to
another storage area before you delete the storage area.
1. To see the list of devices that use this storage area, click the device usage number.
2. Follow Move non-archived recordings from one storage to another (on page 70).
3. Continue until you have moved all devices.
4. Select the storage area that you want to delete.
5. Click the button located below the Storage configuration list.
6. Click Yes.
Move non-archived recordings from one storage to another
You move contents from one recording database to another from the Record tab of the device.
1. Select the device type. In the Overview pane, select the device.
2. Click the Record tab. In the upper part of the Storage area, click Select.
3. In the Select Storage dialog box, select the database.
4. Click OK.
5. In the Recordings Action dialog box, select whether already existing - but non-archived -
recordings should be moved along to the new storage or deleted.
6. Click OK.
Failover tab (recording server)
Available functionality depends on the XProtect Advanced VMS you are using. See the Product
comparison chart (on page 21) for more information.
If your organization uses failover recording servers, use the Failover tab to assign failover servers to
recording servers, see Failover tab properties (on page 70).
For details on failover recording servers, installation and settings, failover groups and their settings,
see About failover recording servers (regular and hot standby) (see "About failover recording servers"
on page 224).
Failover tab properties
Name Description
None Select a setup without failover.