Milestone XProtect Advanced VMS 2014 - Manual (Page 145)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 145 Management Client elements
Event Description
Motion Stopped
Occurs when motion is no longer detected in received video. See
also the description of the Motion Started event.
This type of event requires that the system's motion detection is
enabled for the cameras to which the event is linked.
In addition to the system's motion detection, some cameras can
detect motion themselves and trigger the Motion Stopped (HW)
event, but it depends on the configuration of the camera hardware
and in the system. See Hardware - Configurable events above.
Output Activated
Occurs when an external output port on a device is activated.
This type of event requires that at least one device on your system
supports output ports.
Output Changed
Occurs when the state of an external output port on a device is
changed.
This type of event requires that at least one device on your system
supports output ports.
Output Deactivated
Occurs when an external output port on a device is deactivated.
This type of event requires that at least one device on your system
supports output ports.
PTZ Manual Session Started
Occurs when a manually operated PTZ session (as opposed to a
PTZ session based on scheduled patrolling or automatically
triggered by an event) is started on a camera.
This type of event requires that the cameras to which the event is
linked are PTZ cameras.
PTZ Manual Session Stopped
Occurs when a manually operated PTZ session (as opposed to a
PTZ session based on scheduled patrolling or automatically
triggered by an event) is stopped on a camera.
This type of event requires that the cameras to which the event is
linked are PTZ cameras.
Recording Started
Occurs whenever recording is started. There is a separate event for
manual recording started.
Recording Stopped
Occurs whenever recording is stopped. There is a separate event
for manual recording stopped.
Settings Changed Occurs when settings on a device are successfully changed.
Settings Changed Error
Occurs when an attempt is made to change settings on a device,
and the attempt is unsuccessful.