Milestone XProtect Advanced VMS 2014 - Manual (Page 109)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 109 Management Client elements
Test a preset position (type 1 only)
1. Select the preset position in the Presets tab's list of available preset positions for the camera.
2. Click Activate.
3. The camera moves to the selected preset position.
Patrolling tab (devices)
About the Patrolling tab
The following devices have a Patrolling tab:

Cameras
On the Patrolling tab, you can create patrolling profiles - the automatic movement of a PTZ
(Pan/Tilt/Zoom) camera between a number of preset positions.
Before you can work with patrolling, you must specify at least two preset positions for the camera in
the Presets tab.
Patrolling profiles are the definitions of how patrolling should take place. This includes the order in
which the camera should move between preset positions and how long it should remain at each
position. You can create an unlimited number of patrolling profiles and use them in your rules. For
example, you may create a rule specifying that one patrolling profile should be used during daytime
opening hours and another during nights.
Patrolling tab, displaying a patrolling profile with
customized transitions