Milestone XProtect Advanced VMS 2014 User Manual
Page 81
Milestone XProtect
®
Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com
81
Management Client elements
4. In the PTZ Protocol column, select which positioning scheme you want to use:
o
Absolute: When operators use Pan/Tilt/Zoom controls for the camera, the camera is
adjusted relative to a fixed position, often referred to as the camera's home position
o
Relative: When operators use Pan/Tilt/Zoom controls for the camera, the camera is
adjusted relative to its current position
The content of the PTZ protocol column varies a lot depending on the hardware. Some have
5 to 8 different protocols. See also the camera documentation.
5. In the toolbar, click Save.
You are ready to configure preset positions and patrolling for each PTZ camera:
o
Add a preset position (type 1) (on page 107)
o
Add a patrolling profile (on page 110)