Milestone XProtect Advanced VMS 2014 - Manual (Page 235)

Milestone XProtect ® Advanced
VMS 2014
Administrator's Manual
www.milestonesys.com 235 Feature configuration
cameras, you must first contact your system provider to obtain the needed user name and password
for Axis Dispatch Services.
Install STS environment for One-click camera connection
Prerequisites:

Contact your system provider to obtain the needed user name and password for Axis Dispatch
Services

Make sure your camera(s) support Axis Video Hosting System. Go to
http://www.axis.com/products/avhs/ .

If needed, update your Axis cameras with the newest firmware. Go to
http://www.axis.com/techsup/firmware.php
1. On each camera's homepage, go to Basic Setup, TCP/IP, and select Enable AVHS and
Always
2. From your management server's download web page (controlled by the Download Manager),
install the Axis One-Click Connection Component to setup a suitable Axis secure tunnel
framework.
Add/edit STSs
1. Do one of the following:
a) To add an ST servers, right-click the Axis Secure Tunnel Servers top node, select Add
Axis Secure Tunnel Server.
b) To edit an ST server, right-click it, select Edit Axis Secure Tunnel Server.
2. In the window that opens, fill in the relevant information.
3. If you chose to use credentials when you installed the Axis One-Click Connection
Component, select the Use credentials check box and fill in the same user name and
password as used for the Axis One-Click Connection Component.
4. Click OK.
Register new Axis One-click camera
1. To register a camera under an ST server, right-click it and select Register Axis One-click
Camera.
2. In the window that opens, fill in the relevant information.
3. Click OK.
4. The camera now appears under the relevant ST server.
The camera can have the following color codings: