NORD Drivesystems BU0135 - Manual (Page 18)

SK 105E…175E Motor Starter Manual
18 Pre-series version BU 0135 GB-2713
2.1.2 Adapters for different motors
In some cases, the terminal box attachments are different for different sizes of motor. Therefore it may be
necessary to use an adapter to mount a motor starter.
In order to guarantee the maximum protection class IP55 / IP66 of the entire unit, the protection class of the
motor starter must also correspond to this value.
NORD motor
sizes
Add-on
SK 1x5E Size 1
Add-on
SK 1x5E Size 2
Size 63 – 71 with adapter kit I not possible
Size 80 – 112 Direct mounting with adapter kit II
Size 132 not possible Direct mounting
Overview of adapter kits
Name Add-on SK 1x5E Part No.
Adapter kit size 63-71 to KK80-112
(Adapter kit I)
Adapter plate, terminal box frame seal and screws 275119050
SK TI4-3 adapter kit_80-112
(Adapter kit II)
Adapter plate, terminal box frame seal and screws 275274321
Adapter plate
Seal
Motor Size 71
Motor starter SK 1x5E BGI
Example
NOTE
The adaptability of motors from other manufacturers must be checked individually!
Information for the conversion of controlled drive units to the SK 1x5E can be found in BU0320.