NORD Drivesystems BU0135 - Manual (Page 84)

SK 105E…175E Motor Starter Manual
84 Pre-series version BU 0135 GB-2713
8 Additional information
8.1 Maintenance and servicing information
8.1.1 Maintenance Instructions
SK 1x5E motor starters are maintenance free in normal operation. Please note the "general data" in
Section 7.1 .
Dusty environments
If the motor starter is used in a dusty environment, the cooling-vane surfaces should be regularly cleaned
with compressed air.
Long-term storage
The motor starter must be connected to the 24V supply at regular intervals.
If this is not carried out, there is a danger that the devices may be destroyed.
If the device is stored for longer than one year, it must only be connected to its 24V supply for 30 minutes
before it is connected to the normal mains.
8.1.2 Repair information
If you contact our technical support, please have the precise device type (rating plate/display), accessories
and/or options, the software version used (P707) and the series number (name plate) at hand.
Repairs
The device must be sent to the following address if it needs repairing:
NORD Electronic DRIVESYSTEMS GmbH
Tjüchkampstraße 37
26605 Aurich, Germany
For queries about repairs, please contact:
Getriebebau NORD GmbH & Co. KG
Tel.: 04532 / 289-2515
Fax: 04532 / 289-2555
If a motor starter is sent in for repair, no liability can be accepted for any added components, e.g. such as
mains cables, potentiometer, external displays, etc.!
Please remove all non-original parts from the motor starter.