NORD Drivesystems BU0135 - Manual (Page 3)

SK 105E…175E Motor Starter Manual Concerning this document
BU 0135 GB-2713 3
Documentation
Designation: BU 0135 GB
Part No.: 607 1302
Device series: SK 105E, SK 115E, SK 125E, SK 135E, SK 145E, SK 155E, SK 165E, SK 175E
Device types: SK 1x5E-301-340-A, SK 1x5E-751-340-A, 0.25 - 7.5kW, 3~ 200-500V
Version list
Designation of
previous issues Software
Version Comments
BU 0135 GB, July 2013
Part No. 607 1302 / 2713
V 1.0 R0 First version based on BU 0200 DE / 2011
Publisher
Getriebebau NORD GmbH & Co. KG
Rudolf-Diesel-Str. 1
· D-22941 Bargteheide · http://www.nord.com/
Tel.: +49 (0) 45 32 / 289-0
· Fax +49 (0) 45 32 / 289-2555
Intended use of the motor starter:
Compliance with the operating instructions is essential for fault-free operation and the
acceptance of any warranty claims. These operating instructions must be read before
working with the device!
These operating instructions contain important information about servicing. They must
therefore be kept close to the device.
SK 1x5E motor starters are devices for industrial and commercial plants for operating
three-phase asynchronous motors with squirrel-cage rotors.
SK 1x5E motor starters are devices for fixed installation on motors or in the vicinity of the
motors to be operated. All details regarding technical data and permissible conditions
at the installation site must be complied with.
Commissioning (commencement of the intended use) is not permitted until it has been ensured
that the machine complies with the EMC Directive 2004/108/EEC and that the conformity of
the end product meets the Machinery Directive 2006/42/EEC (observe EN 60204).
ã Getriebebau NORD GmbH & Co. KG, 2013