NORD Drivesystems BU0135 - Manual (Page 85)

8 Additional Information
BU 0135 GB-2713 Pre-series version 85
NOTE
If possible, the reason for returning the component/device should be stated. At least one
contact should be stated in case of queries.
This is important in order to keep repair times as short and efficient as possible.
On request you can also obtain a suitable return goods voucher from Getriebebau NORD.
Unless otherwise agreed, the device is reset to the factory settings after inspection or repair.
Internet information
You can also find the comprehensive manual in German and in English on our Internet site.
www.nord.com
8.2 Abbreviations in this manual
AS (AS1) AS interface
DI (DIN) Digital input
DO (DOUT) Digital output
I/O ........ Input / Output
FLASH . Non-volatile memory
EMC ..... Electromagnetic compatibility
FI -(switch) Leakage current circuit breaker
I/O ........ In-/ Out (Input / Output)
LED ...... Light-emitting diode
P1 .......... Potentiometer 1
P2 .......... Potentiometer 2
P3 .......... Potentiometer 3
P4 .......... Potentiometer 4
S ........... Supervisor Parameter, P003
S1 .......... DIP switch FI (4-pole)
SW ....... Software version, P707
TI ........... Technical information / Data sheet
.............. (Data sheet for NORD accessories)