Logging in to the vca, Accessing the version control repository manager, Accessing vcrm from hp sim – HP Systems Insight Manager User Manual
Page 388: Accessing vcrm in-place, Accessing vcrm from hp sim accessing vcrm in-place, Accessing the version control, Repository manager
Application and Agents (hpasm RPM) 7.00 or later to obtain any inventory data. HP recommends installing
the current version that is in the same
HP ProLiant and Integrity Support Pack
as the VCA.
NOTE:
If the Insight Management Agents are not installed,
cannot be collected by the
VCA. The VCA can still be used to install software, however.
NOTE:
Login accounts that have Administrator or Operator privileges defined in the System Management
Homepage can access all features of the VCA.
Logging in to the VCA
To access the VCA with access to all available features, you must log in to the System Management Homepage
with administrator or operator level access. To log in to the VCA:
1.
Navigate to https://hostname:2381. The Login page appears if Anonymous Access is disabled.
If Anonymous Access is enabled, the System Management Homepage page appears.
2.
After you have logged in, you can browse directly to the VCA by entering
https://hostname:2381/vcagent
in the browser address field, or you can open it in a new
browser window by clicking the HP Version Control Agent link from the System Management Homepage
under Integrated Agents or in the Version Control status box on the Home tab. The VCA page
appears.
Related procedure
▲
Accessing the Version Control Repository Manager
Related topics
•
•
Accessing the Version Control Repository Manager
You can access an HP Version Control Repository Manager through one of the following methods:
•
Accessing a VCRM from HP Systems Insight Manager (HP SIM)
•
Accessing a VCRM directly
Accessing VCRM from HP SIM
1.
Select Tools
→System Information→System Management Homepage.
2.
Select the target system, and click Run Now. See
for more information. The System
Management Homepage appears.
3.
From the Verify Target Systems page, click Run Now.
4.
From System Management Homepage, perform one of the following actions:
•
Click the HP Version Control Repository Manager link. The VCRM Home page appears.
•
Select Tools, and click the HP Version Control Repository Manager link.
Accessing VCRM In-Place
Navigate to http://hostname:2381/vcrepository on the system that has the VCRM installed. The
VCRM Home
page appears.
Related procedure
▲
Accessing the Version Control Agent
Related topics
•
•
388 Tools that extend management