HP Systems Insight Manager - Manual (Page 448)

R_PhysicalDisks
Description Column name
System key DeviceKey
Name of the system DeviceName
System type (for example, CSCI disk) DeviceType
Drive model DriveModel
Drive size DriveSize
Drive firmware DriveFirmware
Mode of transfer for ATA drives TransferMode
Drive serial number DriveSerial
Drive vendor (for example, HP) DriveVendor
Slot number in the system Slot
The drive number attached to the port DriveLoc
The port DrivePort
Populated only for Fibre Channel attached drives, the name of the
chassis that contains the physical disk drive DriveChassis
The total number of hours that a physical drive has been operating
under the system driver DriveServiceTime
The number of read errors that have occurred on a drive that could
not be recovered by the ECC algorithm of the physical drive or
through retries HardReadErrors
The number of write errors that could not be recovered by a
physical drive HardWriteErrors
Device ID DeviceID
Snapshot ID SnapshotID
R_PowerSupply
Description Column name
System key DeviceKey
Name of the system DeviceName
System ID DeviceID
Model name ModelName
Serial number SerialNumber
Firmware revision FirmwareRev
Condition value ConditionVal
Maximum capacity in watts MaxCapacity
Used capacity in watts UsedCapacity
Redundancy state of the power supply RedundancyState
Status of the fault tolerant power supply system Status
Condition of this power supply Condition
Snapshot ID SnapshotID
Description Description
Type of power supply Type
448 Reporting