HP Designjet 8000 Printer series User Manual
Page 130
Five patterns are printed in 0.5% steps in a range of 99.00% to 101.00%.
●
A — Dark lines are visible; the value is too low.
●
B — No lines are visible; the value is correct.
●
C — Light lines are visible; the value is too high.
NOTE
Select a mean value if the media advance value is different in every color. If you
have an image that uses one particular color, then set the value based on that color.
Different values between the left and right sides of the media may be caused by skew.
6.
From the printed result, select the best media advance calibration value.
7.
Press the key, and then the
OK
key to display the current media advance calibration value.
8.
Enter the media advance calibration value, and press the
OK
key.
Select the number you want to change by using the and keys and change the numeric value using
the and keys.
If you need more precise media advance calibration, then you will need to print the DETAIL pattern
as follows:
9.
Press the key, and then the
OK
.
10.
Press the and keys to select the DETAIL pattern.
Select the same print mode as for the ROUGH pattern you printed previously.
11.
Press the
OK
key twice to print the DETAIL pattern.
12.
From the printed result, select the best media advance calibration value.
Five patterns are printed in 0.10% steps in a range of -0.20% to +0.20%.
120
Chapter 7 How do I get the best image quality
ENWW
How do
I get the
best
image
q
ualit
y