Dry time value (dry time value), Print mode setting (print mode), Print direction setting (print direction) – HP Designjet 8000 Printer series User Manual
Page 182
Dry time value (DRY TIME VALUE)
Use this option to define the amount of time the printhead carriage pauses between printing passes for the
selected media type.
Parameters: three-digit time in seconds.
The front panel display asks the user to wait while a countdown readout shows how much drying time
remains.
Print mode setting (PRINT MODE)
Use this option to set the default print quality for the selected media type.
NOTE
This value will only be applied by the printer front panel setting if the PRINT MODE
PREF option is set to FRONT PANEL.
Parameters:
●
NORMAL — standard and high speed print modes (720 x 720 dpi – 8 passes).
●
H-QUALITY — high quality print mode (720 x 720 dpi – 16 passes).
●
H-DENSITY — high density print mode (720 x 720 dpi – 16 passes).
●
DRAFT — draft print mode (360 x 720 dpi – 4 passes).
●
FAST — fast print mode (720 x 720 dpi – 8 passes).
●
FINE DRAFT — fine draft print mode (540 x 720 dpi – 6 passes).
●
3 TIMES — high quality, high density print mode (720 x 720 dpi – 24 passes).
●
F-H-QUALITY — high quality print mode (720 x 720 dpi – 16 passes).
●
F-H-DENSITY — Fast high density print mode (720 x 720 dpi – 16 passes).
●
F-3 TIMES — Normal very high density print mode (720 x 720 dpi – 24 passes).
●
FINE — Fine print mode (720 x 720 dpi – 8 passes).
●
F-FINE — Fast fine print modes (720 x 720 dpi – 8 passes).
Print direction setting (PRINT DIRECTION)
For the selected media type, use this option to set bidirectional printing so that the print carriage places ink
on the media at every pass, or unidirectional printing so that the print carriage places ink on the media once
every two passes.
172
Chapter 14 Tell me about… (menus)
ENWW
Tell me about… (menus)