HP Designjet 8000 Printer series - Manual (Page 40)

15. Take up any excess media by rewinding the roll stop (1) on the media roll. This will help to make sure
there is even tension across the width of the media and avoid skew.
16. Lower the media lever (1) to the required media pressure position, low pressure or normal pressure.
For details, see How do I…
Increase/reduce pressure on media .
17. Open the front cover (1).
30 Chapter 3 How do I load/unload media ENWW
How
do
I load
/u
nlo
ad m
edi
a