HP Designjet 8000 Printer series - Manual (Page 196)

Printhead height (PH HEIGHT ADJ)
Use this menu option to adjust the printhead height. See Change the printhead height
The cap is opened after performing this operation and the carriage height can be adjusted.
Parameters: none.
Replace Printhead (REPLACE PRINTHEAD)
This menu option is for HP Support purposes only.
Parameters: none.
Reseat Printhead (RESEAT PRINTHEAD)
This menu option is for HP Support purposes only.
Parameters: none.
The PH. REC menu
This menu is used to clean the printheads of the printer.
Press the key to select the PH. REC menu options.
Parameters:
● NORMAL ALL — performs normal cleaning of all the printheads.
● STRONG ALL — performs strong cleaning of all the printheads.
186 Chapter 14 Tell me about… (menus) ENWW
Tell me about… (menus)