HP Designjet 8000 Printer series - Manual (Page 203)

Parameters:none.
USB speed (USB SPEED)
This option sets the USB port speed.
Parameters: HIGH, FULL
Factory default setting (FACTORY DEFAULT)
This option sets all parameter values to default factory settings.
Parameters: none.
Printer firmware upgrade (PRINTER FW UPGRADE)
This option upgrades the printer firmware.
Parameters: none.
The HEATER menu
This menu is used to modify heater settings. Press the key to access heater options.
Heater delay time (HEATER DELAY TIME)
Use this option to turn the heater off after the selected amount of time.
Parameters: NONE, 30 min, 60 min, 90 min, 120 min, ENDLESS.
ENWW The HEATER menu 193
Tell me
ab
ou
t…
(
m
enu
s)