HP Designjet 8000 Printer series - Manual (Page 21)

2 How do I… (basic operation topics)?
● Connect to a computer
● Turn the power on/off
● Check the firmware version
Connect to a computer
This section describes system configuration and cable connection procedures.
NOTE Before connecting or disconnecting the USB Cable, turn the printer OFF.
System configuration (connection example)
The following connection is possible.
1. Printer server (RIP).
2. USB interface.
3. Printer.
Connection procedure
NOTE Before you connect the USB cable, you should ensure that the RIP is installed so that
the printer can be detected by your operating system. Refer to the instructions that came with
your RIP for installation instructions.
ENWW Connect to a computer 11
How
do I… (basic operation
to
p
ic
s)
?