HP Designjet 8000 Printer series - Manual (Page 198)

Error log information print (ERROR LOG PRINT)
This option prints error log information saved in the printer.
Parameters: none.
History print (HISTORY PRINT)
This option prints maintenance information on the printer.
Parameters: none.
The ADJUST menu
This menu is used to set mechanical adjustment parameters. See How do I get the best image quality .
When the key is pressed, mechanical adjustment parameters can be set.
Adjustment pattern prints (TEST PRINTS)
This menu is used to print the adjustment patterns for adjusting the printer mechanically and electrically.
When the CANCEL key is pressed during printing, the print can be stopped.
Parameters:
● NOZZLE PRINT — Prints a pattern using all the printhead nozzles.
● NOZZLE PRINT/RECOVER — Prints a pattern three times using all the printhead nozzles. A printhead
recovery is performed between the printing of each pattern.
NOTE You should cancel the process as soon as all the nozzles have been recovered.
You do not have to wait for the pattern to be printed three times,
● PH TO PH — Prints the printhead to printhead alignment pattern.
188 Chapter 14 Tell me about… (menus) ENWW
Tell me about… (menus)