HP Designjet 8000 Printer series - Manual (Page 48)

6. When installing the cut sheet in the printer, align the edge of the cut sheet (2) to the right of the guide
line (1).
7. Feed the cut sheet (1) until a beep sounds from the media feeder (about 200 mm).
NOTE If you have problems loading media, feed the media into the printer by holding both
edges of the media.
Take care that the media does not curl inside the front cover and that the media edge guards
are not obstructing the media path.
38 Chapter 3 How do I load/unload media ENWW
How
do
I load
/u
nlo
ad m
edi
a