HP Designjet 8000 Printer series - Manual (Page 61)

3. Slide the left take-up reel assembly (1) to insert the left media hub into the core tube and tighten the
stop screw (2) on the left take-up reel assembly.
4. Load roll media into the printer
● Lift the media lever (1)
● Load the media
● Lower the media lever
5. Feed the media into the printer using the FORM FEED menu on the front panel until there is sufficient
media at the front of the printer to attach the media to the core tube.
● Press the ONLINE key.
● Press the SHIFT key to display the FORM FEED option.
● Press the key to feed media through the printer.
ENWW Use the take-up reel 51
How do
I load
/u
nlo
ad m
edia