HP Designjet 8000 Printer series - Manual (Page 65)

Print the take-up reel print as follows:
1. When the "Printer Ready" message appears on the Front Panel, press the ONLINE key to take the
Printer offline.
2. Press the SHIFT key twice and select the ADJUST menu using the key.
3. In the ADJUST submenu, scroll to TEST PRINTS and press the ENTER key.
4. In the TEST PRINTS menu scroll to the TUR ADJ PRINToption and press the ENTER key.
5. Press the ENTER key to start printing the pattern.
The printer automatically feeds the media through the printer so that the pattern reaches the take-up reel
tension bar.
If the pattern (2) at the right and left edges of the media is aligned with the groove (1) on the tension bar,
no height adjustment is required.
ENWW Use the take-up reel 55
How do
I load
/u
nlo
ad m
edia