HP Designjet 8000 Printer series User Manual
Page 76
Advertising
10.
Close the carriage maintenance cover (1) and close the front cover (2).
To change the printhead height on the front panel:
1.
Press the
ONLINE
key.
2.
Press the key to display the MEDIA REG menu.
3.
Scroll to the PH HEIGHT VAL option and press the
OK
key.
4.
Select NORMAL or HIGH, according to the mechanical change you have made, and press the
OK
key.
Parameters: NORMAL — default, HIGH — for thick media.
NOTE
When the printhead height is changed, a gap in printing may occur in bidirectional
printing. Adjust the correction value for bidirectional printing in the MEDIA REG menu.
66
Chapter 5 How do I… (ink topics)
ENWW
How do
I… (
ink
to
pics)
Advertising