HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 191)

Distribution Mount point
/media/ media-volume-id
#
Note 1
HDLM cannot be installed if the DVD-ROM is mounted to a mount
point other than the above.
Note 2
To copy the DVD-ROM to a directory, and then install HDLM from that
directory, copy the DVD-ROM to a directory with the same name as
the mount point noted above. If the file permissions or the directory
structure differs, HDLM cannot be installed.
#
This refers to the volume name for the CD-ROM or other media,
formatted for ISO-9660 file systems. Use the volname command to
check media-volume-id.
The following shows an execution example for when media-volume-id
is VOL01234.
# volname /dev/cdrom
VOL01234
#
4
.
Check the version of HDLM.
Execute installux.sh or the HDLM installation utility (installhdlm)
stored on the HDLM DVD-ROM to check the version of HDLM that will be
installed.
The following example shows how to execute the command when the
mount point for the DVD-ROM is /media/cdrom:
¢
When executing installux.sh
# /media/cdrom/installux.sh -v
¢
When executing the installhdlm utility
# /media/cdrom/HDLM_Linux/installhdlm -v
A command execution example is described below. x.x.x-xx is the version
of HDLM.
KAPL09177-I HDLM version: x.x.x-xx
5
.
Perform the installation.
Execute installux.sh or the installhdlm utility stored on the HDLM
DVD-ROM to start installation.
The following shows an installation execution example for when the DVD-
ROM mount point is /media/cdrom.
Creating an HDLM Environment
3-119
Hitachi Dynamic Link Manager (for Linux®) User Guide