HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 564)

Message ID Message Text Explanation
None.
KAPL08026-E An error occurred on all the
paths of the LU. PathID =
aa...aa
Details
An error occurred in the last,
remaining path of an LU. (This is
most likely as a result of a
disconnection.)
aa...aa: Path ID (same as PathID
of view -path) (decimal (base-10)
number)
Action
Errors are detected in all the
paths connected to the LUs. See
What To Do for a Path Error on
page 5-3 to make the path shown
in the error message or the paths
connected to the target LU.
KAPL08027-E A path was excluded from the
items subject to automatic
failback. PathID = aa...aa
Details
A path was excluded from being
subject to automatic failbacks
because the system judged that
an intermittent error was
occurring in that path.
aa...aa: Path ID (same as PathID
of view -path) (decimal (base-10)
number)
Action
An intermittent error has
occurred. Check the path for any
possible problems. For details on
what to do, see What To Do for a
Path Error on page 5-3 and switch
the path shown in the message
into Online.
KAPL08032-I A path was recovered. (PathID
= aa...aa)
Details
The path has changed to an online
status.
aa...aa: Path ID (same as PathID
of view -path) (decimal
(base-10) number)
Action
None.
KAPL08033-E No path connected to the LU
that connects to Path ID
(aa...aa) is in the Online(D)
status.
Details
Due to path failure, path deletion,
or offline operation, no path
connected to the LU that connects
to Path ID (aa...aa) is in the
Online(D) status.
8-52
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide