HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 545)

Message ID Message Text Explanation
Check whether another program is
currently using this file (for
example, the file is being opened
in a text editor), or whether the
file has been inadvertently
deleted.
KAPL04009-E The option definition is invalid. Details
HDLM manager could not start
normally because some of the
definitions in the option definition
file were invalid.
Action
If the KAPL04033-W message is
output after this message,
execute the dlnkmgr view -sys
-sfunc command, and then check
the option settings.
Use the dlnkmgr set operation to
return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
If the same error occurs, re-install
HDLM. For details on the view
operation, see view (Displays
Information) on page 6-31 . For
details on the set operation, see
set (Sets Up the Operating
Environment) on page 6-15 .
KAPL04010-E Could not open the error log file. Details
HDLM manager cannot start
normally (unable to open the error
log file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log).
Action
Check whether another program is
using the file (for example, the file
is being opened in a text editor),
or whether the error log file has
been inadvertently deleted.
KAPL04011-E Could not output the error log
file.
Details
The log information could not be
output to the error log
file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log.
Action
Messages
8-33
Hitachi Dynamic Link Manager (for Linux®) User Guide