HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 578)

Message ID Message Text Explanation
have write permission for it.
Make sure there is enough
unused capacity and that the
user has write permission for
this directory, and then try
again.
other error code:
Contact your HDLM vendor or
the maintenance company if
there is a maintenance
contract for HDLM.
KAPL09216-E An error occurred during I/O of
a file that installhdlm uses. Error
Code = aa...aa,bb...bb
Details
An error occurred during I/O of a
file that installhdlm uses.
aa...aa: Error number that
indicates the executed processing
(decimal (base-10) number)
bb...bb: Return value of the
executed processing (decimal
(base-10) number)
Action
Make sure that sufficient unused
capacity exists for the /tmp
directory. If the capacity is
insufficient, allocate the required
amount of capacity, and then
retry the operation. For details
about the required unused
capacity. For details about the
required unused capacity, see
Disk Requirements on page 3-88
in Memory and Disk Capacity
Requirements on page 3-88 .
KAPL09217-E An error occurred during
reading of the installation
information settings file. Error
Code = aa...aa,bb...bb
Details
An error occurred while reading
the installation information
settings file.
aa...aa: Error number (decimal
number) that specifies the
executed processing
bb...bb: Return value (decimal
number) of the executed
processing
Action
If the error code is 9001,-1:
You do not have read
permissions for the
installation information
settings file. Make sure that
you have access permissions.
If any other error code is output:
8-66
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide