HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 426)

Parameter
and program
information to
be displayed
Item Description
-pstv
The display-of-
the-physical-
storage-
system-
information
setting
Physical
Storage View
The value of the display-of-the-physical-storage-
system-information setting is displayed.
on: Enabled
off: Disabled
#
When you use cluster software, the settings of the cluster function
and the kinds of cluster servers are not displayed. However, the
cluster function will operate normally.
Examples
Example 1
The following example shows how to display information about the HDLM
function settings.:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -sfunc
HDLM Version : x.x.x-xx
Service Pack Version :
Load Balance : on(extended lio)
Support Cluster :
Elog Level : 3
Elog File Size(KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace Files Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Reservation Status :
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Example 2
The following example shows how to display information about the HDLM
manager:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys -msrv
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
6-38
Command Reference
Hitachi Dynamic Link Manager (for Linux®) User Guide