HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 455)

Legend:
- : Not displayed
#1
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -item
parameter.
- all was specified.
- No value was specified for the parameter.
#2
This information is displayed when one of the following conditions exist:
- The user selected the item to be displayed by using the -lu -c -item
parameter.
- No value was specified for the parameter.
#3
This storage system applies when the dynamic I/O path control function is
disabled.
To display corresponding information about an HDLM device, SCSI device, and
LDEV
-drv
Using this parameter displays the PathID, the HDLM device, SCSI device
for the HDLM device, and information on the LDEV in the storage system
(storage system model name, serial number, and LU number, separated
by period).
For details on the contents of each display item, see
Table 6-19 To display
corresponding information about an HDLM device, SCSI device, and LDEV
on page 6-68 .
The sub-parameters are as follows:
-pstv|-vstv
If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating system
is displayed. If neither parameter is specified, information is displayed
according to the value specified in the -pstv parameter of set operations.
For information about the items that are displayed differently depending
on the specified -pstv and -vstv parameters, see Table 6-10 Display
items for which the display results of the view operation differ depending
on the -pstv parameter specification on page 6-29 in Parameters on page
6-16 .
-t
Does not display the title for each information item.
Command Reference
6-67
Hitachi Dynamic Link Manager (for Linux®) User Guide