HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 215)

¢
When ELILO is used as the boot loader:
:
:
image = vmlinuz-2.6.16.60-0.54.5-default
label = 51
append = "splash=silent multipath=off"
description = Linux
initrd = initrd-2.6.16.60-0.54.5-default
root = /dev/disk/by-id/scsi-35001862001472c70-part12
multipath=off is set in the underlined section.
¢
When GRUB is used as the boot loader with Xen kernels:
For details on Xen kernels, see
Table 3-61 Xen Hypervisor Operating
Environments Supported by HDLM on page 3-93 .
:
:
title XEN
root (hd0,0)
kernel /xen-pae.gz
module /vmlinuz-2.6.16.60-0.54.5-xenpae \
root=/dev/disk/by-id/scsi-SFUJITSU_MAS3735NC_A050P360007N-
part6 vga=0x317 \
resume=/dev/disk/by-id/scsi-
SFUJITSU_MAS3735NC_A050P3600077-part2 \
splash=silent showopts multipath=off
module /initrd-2.6.16.60-0.54.5-xenpae
multipath=off is set in the underlined section.
¢
When GRUB is used as the boot loader with non-Xen kernels:
For details on kernels supported by HDLM, see
Hosts and OSs
Supported by HDLM on page 3-3 .
:
:
title SUSE LINUX Enterprise Server 10 SP3
root (hd0,0)
kernel /vmlinuz-2.6.16.60-0.54.5-smp root=/dev/VG/root
vga=0x31a \
resume=/dev/VG/swap splash=silent showopts
multipath=off
initrd /initrd-2.6.16.60-0.54.5-smp
multipath=off is set in the underlined section.
3
.
Install HDLM.
See
Performing a New Installation of HDLM on page 3-106 , and then
create an HDLM device by performing step 2 to 12.
4
.
Check whether LVM is used in the boot disk environment.
Execute the mount command to check the name of the devices mounted
on the root partition (/). If LVM is used, device names that contain the
Creating an HDLM Environment
3-143
Hitachi Dynamic Link Manager (for Linux®) User Guide