HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 609)

Message ID Message Text Explanation
device file of an HDLM device has
been deleted.
aa...aa: Logical device file name
of HDLM device
Action
None. For details on the
dlmcfgmgr utility, see
dlmcfgmgr
Utility for Managing the HDLM
Configuration on page 7-22 .
KAPL10350-E The HDLM driver(s) is not
loaded. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because the
HDLM driver was not loaded.
Action
Carry out the following process:
a
.
Execute the following
command to load the HDLM
driver
# /opt/
DynamicLinkManager/bin/
dlminsadrv
# modprobe sddlmfdrv
b
.
Re-execute the dlmcfgmgr
utility.
For details on the dlmcfgmgr
utility, see dlmcfgmgr Utility
for Managing the HDLM
Configuration on page 7-22 .
KAPL10351-E The specified HDLM-
configuration definition utility is
invalid. Operation name =
aa...aa, Parameter = bb...bb
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because the
specified operation name
(aa...aa:) or parameter (bb...bb)
was invalid.
aa...aa: Operation name
bb...bb: Parameter
Action
Confirm that the operation name
and parameter are correct, and
then re-execute the dlmcfgmgr
utility. For details on the
dlmcfgmgr utility, see
dlmcfgmgr
Utility for Managing the HDLM
Configuration on page 7-22 .
KAPL10352-W The HDLM device is in use.
HDLM device = aa...aa. Stop the
application using the HDLM
Details
An attempt to execute the HDLM-
configuration definition utility
Messages
8-97
Hitachi Dynamic Link Manager (for Linux®) User Guide