HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 627)

Message ID Message Text Explanation
For dracut command:
If the file name displayed in the
message is the HDLM file name
shown below, HDLM may not be
installed correctly. In this situation,
re-install HDLM.
/etc/dracut.conf.d/hdlm-
dracut.conf
If the file name displayed in the
message is another file name
The OS (kernel) or the HBA
driver may not be installed
correctly. Confirm sure the
existence of the files.
For dlmmkinitrd:
If the file name displayed in the
message is the file name specified in
the fstab parameter of the Boot
Disk Support Utility (dlmmkinitrd)
Check the specified file name,
specify the file name of the
existing fstab file, and then re-
execute the utility.
If the file name displayed in the
message is the HDLM file name
shown below, HDLM may not be
installed correctly. In this
situation, re-install HDLM.
If Red Hat Enterprise Linux 5 is
being used, replace /lib/
modules/kernel-release-
number/kernel/drivers/
DynamicLinkManager/ with the
following:
/lib/modules/2.6.18-xxx/
extra/hitachi/
DynamicLinkManager
In the list shown below, kernel-
version indicates the value
displayed by the uname -r
command.
•
/etc/opt/
DynamicLinkManager/
dlmmkinitrd.conf
• /lib/modules/kernel-
version/kernel/drivers/
DynamicLinkManager/
sddlmfdrv.o
• /lib/modules/kernel-
version/kernel/drivers/
Messages
8-115
Hitachi Dynamic Link Manager (for Linux®) User Guide