HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 360)

Figure 4-13 When the Status of the Path That Goes Through the
Fibre Channel Switch to Be Replaced Is Offline(C)
2
.
Replace the Fibre Channel switch for the path that has been placed in
Offline(C) status.
In this example, replace the Fibre Channel switch connected to the HBA
with host port number 0001.
3
.
Place in Online status the path that goes through the replaced Fibre
Channel switch.
For example, to place in Online status the path that goes through the HBA
with host port number 0001 and bus number 0000, execute the following
command:
# /opt/DynamicLinkManager/bin/dlnkmgr online -hba 0001.0000
4
.
Check the path information.
For example, execute the following command:
# /opt/DynamicLinkManager/bin/dlnkmgr view -path
For details about the path information, see view (Displays Information) on
page 6-31 .
4-56
HDLM Operation
Hitachi Dynamic Link Manager (for Linux®) User Guide