HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 618)

Message ID Message Text Explanation
Action
Install HDLM that adjusts to the
kernel that is running now.
KAPL10923-E The HDLM file is invalid. File
name = aa...aa. Reinstall the
HDLM software.
Details
A file necessary for processing
HDLM cannot be found.
Alternatively, the content of a file
is invalid.
aa...aa: Name of file where error
was detected.
Action
Reinstall an HDLM.
KAPL10934-W A file could not be opened. File
name = /etc/opt/
DynamicLinkManager/
hdlm_utillog.conf, Errno =
aa...aa. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
Details
An attempt to open the settings
file for the HDLM utility log
(/etc/opt/DynamicLinkManager/
hdlm_utillog.conf) has failed.A
maximum log file size of 1024 KB
will be assumed, and the
processing of the dlmcfgmgr
utility will continue.
aa...aa: Error number (decimal
number)
Action
Make sure that the file exist. If the
file is normal, execute the
DLMgetras utility for collecting
HDLM error information, and then
contact your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM.
For details on the DLMgetras
utility, see DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3 .
KAPL10935-W An internal error occurred in the
file operation. File name
= /etc/opt/
DynamicLinkManager/
hdlm_utillog.conf. Execute the
DLMgetras utility to collect error
information, and then contact
your vendor or maintenance
company.
Details
An internal error occurred during
operations of the settings file for
the HDLM utility log (/etc/opt/
DynamicLinkManager/
hdlm_utillog.conf). A maximum
log file size of 1024 KB will be
assumed, and the processing of
the dlmcfgmgr utility will
continue.
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
8-106
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide