HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 598)

Message ID Message Text Explanation
Utility for Managing the HDLM
Configuration on page 7-22 .
KAPL10302-I /sbin/dlmcfgmgr completed
normally.
Details
The HDLM-configuration definition
utility (dlmcfgmgr) has completed
successfully.
Action
None. For details on the
dlmcfgmgr utility, see
dlmcfgmgr
Utility for Managing the HDLM
Configuration on page 7-22 .
KAPL10305-E A special file could not be
created. Filename = aa...aa.
Execute the DLMgetras utility to
collect error information, and
then contact your vendor or
maintenance company.
Details
A logical device file for an HDLM
device cannot be created.
aa...aa: Logical device file name
of HDLM device
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM. For details on
the DLMgetras utility, see
DLMgetras Utility for Collecting
HDLM Error Information on page
7-3 .
KAPL10306-W The configuration definition file
is invalid. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
Details
The configuration definition file
(/etc/opt/
DynamicLinkManager/.dlmfdrv.c
onf) is invalid.
Action
/etc/opt/
DynamicLinkManager/.dlmfdrv.c
onf to an alias name and restart
the host. The logical device file
name of the HDLM device might
be changed, so that after the host
restarts, check the logical device
file name. If the logical device file
name was changed, modify the
path to the upper-level program.
KAPL10308-W The configuration definition file
could not be created. Execute
the DLMgetras utility to collect
error information, and then
contact your vendor or
maintenance company.
Details
The configuration definition file
(/etc/opt/
DynamicLinkManager/.dlmfdrv.c
onf) could not be created.
Action
8-86
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide