HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 58)

The following table lists and describes the error information that can be
collected in logs.
Table 2-8 Types of Error Information
Log name Description Output destination
Process-specific-
trace information
file
Operation logs for the HDLM command
are collected.
The default file path
is /var/opt/
DynamicLinkManager/log/
dlnkmgr[1-2].log.
Trace file Trace information on the HDLM
manager is collected at the level
specified by the user. If an error occurs,
you might need to change the settings
to collect trace information.
The following is the trace file
name:
/var/opt/
DynamicLinkManager/log/
hdlmtr[1-64].log
Error log Error information is collected for the
user-defined level. By default, HDLM
collects all error information.
HDLM Manager logs:
/var/opt/
DynamicLinkManager/l
og/dlmmgr[1-16].log
Hitachi Command Suite
Common Agent Component
logs:
/var/opt/
DynamicLinkManager/l
og/dlmwebagent[1-
N].log
The value N depends on
the setting in the file
dlmwebagent.properti
es.
HDLM-
configuration
definition utility (
dlmcfgmgr ) log
Logs are collected when the dlmcfgmgr
utility is executed.
The following is the log file
name.
•
/var/opt/
DynamicLinkManager/l
og/
dlmcfgmgr[1-2].log
• /var/opt/
DynamicLinkManager/l
og/dlminquiry.log
Syslog The HDLM messages on or above the
level set by the user with syslogd
settings file are collected.
#
We recommend that you configure the
system so that information at the
Information level and higher is output.
Syslogs can be checked using a text
editor.
The default file path
is /var/log/messages.
The syslog file path is
specified in the syslogd
settings file. For details, see
the Linux documentation.
#
When you want to configure the system so that HDLM messages are
output to syslog, specify user for the facility in the syslog settings file.
2-34
HDLM Functions
Hitachi Dynamic Link Manager (for Linux®) User Guide