HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 637)

Message ID Message Text Explanation
the root partition setting in the /etc/
fstab file and then retry the operation.
KAPL12335-E A file system that HDLM
can support as a boot
disk was not found in the
file. File name = aa...aa
Details
aa...aa: The name of the file referenced
by the dlmmkinitrd utility for supporting
the boot disk
Action
Modify the fstab file specified in the
fstab parameter of the boot disk
support utility (dlmmkinitrd), or the file
system of the /etc/fstab file root
partition, to a file system that can be
applied when the HDLM device is used as
a boot disk (ext2 or ext3). Also, make
sure that the kernel package has been
installed correctly.
KAPL12336-E The user does not have
permission to execute the
utility for supporting the
boot disk.
Action
Retry as a user with root permission.
KAPL12337-E UUID and LABEL
information on the root
partition were not able to
be acquired.
Action
Confirm UUID or LABEL is set to the root
partition. Set UUID or LABEL to the root
partition when it is not set and re-
execute the dlmmkinitrd utility for
supporting the boot disk.
KAPL12338-E The command does not
exist or does not have
executable permissions.
Command name =
aa...aa
Details
There is no command, or the user does
not have execution permission.
aa...aa: Command name
Action
Make sure the specified command exists
and the user has execution permission.
KAPL12340-E A backup of the
configuration definition
file was used to configure
the HDLM devices.
Confirm that the HDLM
devices are properly
configured, and then
make them management
targets before using them
again.
Details
This message is output when the
following conditions are met:
¢
When the configuration definition file
becomes corrupted, because, for
example, a user directly edited the
file.
¢
When the configuration definition file
becomes corrupted, because, for
example, the system stopped while
a program was creating the
configuration definition file.
Action
Make sure that the all the HDLM device
and LDEV associations are correct. If all
the associations are correct, make any
Messages
8-125
Hitachi Dynamic Link Manager (for Linux®) User Guide