HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 423)

Parameter
and program
information to
be displayed
Item Description
off: Disabled
• Checking interval:
When the setting of the path health checking
is on, the checking interval of path health
checking is displayed within the parentheses
following on. The time is in minutes.
Auto Failback • Settings for an automatic failback:
on: Enabled
off: Disabled
• Checking interval:
When the setting of the automatic failback is
on, the checking interval of automatic
failback is displayed within the parentheses
following on. The time is in minutes.
Reservation
Status Blank
Intermittent
Error Monitor • Setting for intermittent error monitoring:
on: Enabled
off: Disabled
When automatic failback is off, intermittent
error monitoring is disabled although
Intermittent Error Monitor will be shown
as on. When the automatic failback function
is on, intermittent error monitoring will be
enabled.
• Intermittent error monitoring interval and
number of times that the error needs to
occur
When intermittent error monitoring is on, the
specified intermittent error monitoring
interval and number of times that the error
needs to occur are displayed within the
parentheses following on. The format is
number-of-times-error-is-to-occur/
monitoring-interval. The time is in minutes.
Dynamic I/O
Path Control Setting status of the dynamic I/O path control
function
•
Setting status
on: Enabled
off: Disabled
• Checking interval
The parentheses following the setting status
shows the checking interval for reviewing
information about the switching of controllers
Command Reference
6-35
Hitachi Dynamic Link Manager (for Linux®) User Guide