HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 537)

Message ID Message Text Explanation
KAPL01158-E Dynamic I/O path control cannot
be applied to the specified
storage.
Details
aa...aa: on or off
Action
Use the view operation of the
HDLM command (dlnkmgr) to
check the path ID. For details on
the view operation, see view
(Displays Information) on page
6-31 .
KAPL01159-I Paths were added. (number of
paths added = aa...aa,
completion time = bb...bb)
Details
This message indicates that an
add operation succeeded.
aa...aa: number of paths added
bb...bb: year (4 digits)/month/
date hour:minute:second
Action
Use the view operation of the
HDLM command (dlnkmgr) to
verify information about the
added paths.
KAPL01160-W The path configuration was not
changed.
Details
If an add operation was executed
This message indicates that
no paths were added.
If a delete operation was
executed
This message indicates that
no paths were deleted.
Action
If an add operation was executed
- Execute an OS command,
and check whether the
addition of paths is
recognized by the OS.
- Use the view operation of
the HDLM command
(dlnkmgr) to check whether
the paths have already been
added to HDLM.
If a delete operation was
executed
- Check whether the paths to
be deleted have been
disconnected from the
system.
- Use the view operation of
the HDLM command
(dlnkmgr) to check whether
Messages
8-25
Hitachi Dynamic Link Manager (for Linux®) User Guide