HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 682)

Perform installation according to the documentation for relevant products
(packages).
4
.
Back up the currently used initial RAM disk image file for HDLM.
5
.
Execute the dlmmkinitrd utility (utility for supporting a boot disk) with
the -f parameter specified to create an initial RAM disk image file for
HDLM.
For the parameter, specify the initial RAM disk image file name that is
currently used.
6
.
Delete the kernel parameter you added in step 2 from the boot loader
configuration file.
If the boot loader configuration file contains any entries other than the
entry for using HDLM as a boot disk, make sure that root=HDLM device is
not specified as a kernel parameter, and then go to step 9. If root=HDLM
device is specified as a kernel parameter, go to step 7.
7
.
Execute the HDLM-configuration definition utility (dlmcfgmgr) with the -v
parameter specified to check the relationship between the HDLM device
and SCSI device.
# dlmcfgmgr -v
HDevName Management Device Host Channel Target Lun
/dev/sddlmaa configured /dev/sda 2 0 0 0
/dev/sdb 2 0 1 0
KAPL10302-I /sbin/dlmcfgmgr completed normally.
The HDevName column displays HDLM devices and the Device column
displays SCSI devices.
If the HDLM device corresponds to more than one SCSI device, specify
the SCSI device that appears first. In this example, /dev/sda indicates a
SCSI device.
8
.
In the boot loader configuration file, replace root=HDLM-device with
root=SCSI-device.
Replace the HDLM device with the SCSI device you determined in step 7.
:
:
title Red Hat Enterprise Linux Server (2.6.18-92.el5PAE)
root (hd0,0)
kernel /vmlinuz-2.6.18-92.el5PAE ro rhgb quiet root=/dev/
sda2
initrd /initrd-2.6.18-92.el5PAE.img
:
:
In this example, replace the HDLM device with root=/dev/sda2.
9
.
Restart the host.
10
.
Use the mount command or vgdisplay command to make sure that the
root directory (/) is the HDLM device.
Example when LVM is not used:
B-4
Troubleshooting Products That Use the Weak-Modules Script
Hitachi Dynamic Link Manager (for Linux®) User Guide