HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 319)

:
:
title Red Hat Enterprise Linux (2.6.18-194.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro option
ramdisk_size=18958 option
initrd /initrd-hdlm-2.6.18-194.el5.gz
¢
When ELILO is used as the boot loader:
:
:
image=/boot/vmlinuz-2.6.18-194.el5
label=HDLM_194.EL
initrd=/boot/initrd-hdlm-2.6.18-194.el5.gz
read-only
append="option ramdisk_size=18958 option"
7
.
Change the name of the configuration contained in the boot loader
configuration file.
Change the name of the configuration that you copied in step 5. You can
assign any name that indicates that the configuration is used for
specifying the SCSI device.
¢
When GRUB is used as the boot loader:
Change the underlined text as follows:
Before:
title Red Hat Enterprise Linux (2.6.18-194.el5)
After:
title sd-Red Hat Enterprise Linux (2.6.18-194.el5)
¢
When LILO or ELILO is used as the boot loader:
Change the underlined text as follows:
Before:
label=HDLM_194.EL
After:
label=sd-HDLM_194.EL
8
.
Specify the UUID or LABEL that you checked in step 3 for root in the boot
loader configuration file.
Change the specification for root contained in the configuration that you
copied in step 5.
¢
When GRUB is used as the boot loader:
Add root=SCSI-device to the kernel line.
:
:
title Red Hat Enterprise Linux (2.6.18-194.el5)
root (hd0,0)
kernel /vmlinuz-2.6.18-194.el5 ro option
ramdisk_size=18958 root=/dev/sda2 option
HDLM Operation
4-15
Hitachi Dynamic Link Manager (for Linux®) User Guide