HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 183)

Elog File Size (KB) : 9900
Number Of Elog Files : 2
Trace Level : 0
Trace File Size(KB) : 1000
Number Of Trace Files : 4
Path Health Checking : on(30)
Auto Failback : on(1)
Reservation Status :
Intermittent Error Monitor : off
Dynamic I/O Path Control : off(10)
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver WakeupTime ElogMem Size
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss 1000
HDLM Driver Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent -
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
#
Even when cluster software is being used, Support Cluster is blank.
However, the cluster function is operating normally.
21
.
Check that the correct version of HDLM is installed.
If HDLM version x.x.x-xx is displayed, the installed HDLM version is
correct. x.x.x-xx is the version of the installed HDLM.
22
.
Check that the programs are running properly.
If HDLM Manager, HDLM Alert Driver, and HDLM Driver are all Alive, all
programs are running correctly.
If the programs are not running properly, see
What To Do for a Program
Error on page 5-6 , and then take actions.
After the installation, check the path configuration according to the procedure
indicated in Checking the Path Configuration on page 3-188 .
Preparations for an Upgrade Installation or Re-installation of HDLM
This section describes the preparations required before performing an
upgrade installation or re-installation of HDLM.
For details on how to re-install HDLM, see Performing a Re-installation of
HDLM on page 3-113 . For details on how to upgrade-install HDLM, see
Performing an Upgrade Installation of HDLM on page 3-118 .
Operations Required for Devices to Be Managed by HDLM
Before performing an upgrade installation or re-installation of HDLM, you
must unmount the HDLM devices that correspond to HDLM-managed devices,
and then back up the HDLM-managed devices.
1
.
Terminate the processes of all applications that access the disks managed
by HDLM.
Creating an HDLM Environment
3-111
Hitachi Dynamic Link Manager (for Linux®) User Guide