HP Hitachi Dynamic Link Manager Software Licenses User Manual

Page 492

Advertising
background image

Specify this parameter to output the correspondence between the current

iLUs and HDLM device names to the device name replacement definition

file (/etc/opt/DynamicLinkManager/dlmchname.conf).
The device name definition file is backed up for three generations

(including the current device name definition file).

Important

If you execute the dlmchname utility without specifying any parameters,

initial values (0) are set for all statistics (number of I/Os and number of

I/O errors) managed by HDLM.

If the -f parameter is not specified, the name of an HDLM device that is

being used cannot be changed.

For disks, such as system disks, that cannot be placed in offline during

system operation, execute the HDLM device name replacement utility with

the -f parameter specified, and then restart the host to change the

name.
If an HDLM device name is changed with the -f parameter specified, the

following restrictions are applied until the host restarts:

¢

An error occurs if the dlmcfgmgr utility is executed.

¢

The HDLM device name before the change is used in I/Os.

When changing the name of an HDLM device that is a member of an LVM

volume group, execute the dlmchname utility, and then the vgscan

command.

You cannot execute the dlmchname utility on HDLM devices that are not

configured.

Editing the Device Name Replacement Definition File

This subsection explains how to edit the device name replacement definition

file (/etc/opt/DynamicLinkManager/dlmchname.conf).

How to Edit the Device Name Replacement Definition File

Keep the following in mind when you edit the device name replacement

definition file:

Specify a storage system serial number, an iLU, and an HDLM device

name on one line, separating each one with a space.

To enter a comment line, specify a hash mark (#) at the beginning of the

line.

Items to Be Defined in the Device Name Replacement Definition File

In the device name replacement definition file, the correspondence among

storage system serial numbers, iLUs, and HDLM device names is defined.

7-32

Utility Reference

Hitachi Dynamic Link Manager (for Linux®) User Guide

Advertising
This manual is related to the following products: