HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 493)

Execute the dlmchname utility with the -o parameter to create a device name
replacement definition file (/etc/opt/DynamicLinkManager/
dlmchname.conf). An example of executing the command is as follows:
3585011299 0090 sddlmac
3585011299 0091 sddlmab
3585011299 0092 sddlmaa
To change an HDLM device name, edit only the third field, which indicates the
HDLM device name.
For details about the characters that can be used for HDLM device names, see
Logical Device Files for HDLM Devices on page 2-11 .
#
When several digits are output before storage system serial numbers,
ignore them.
dlmmkinitrd Utility for Supporting a Boot Disk
This utility creates an initial RAM disk image file for using an HDLM device as
a boot disk.
Note that, for Red Hat Enterprise Linux 6, the dlmmkinitrd utility is not
installed. To create an initial RAM disk image file in Red Hat Enterprise Linux
6, use the dracut command.
Format
For Red Hat Enterprise Linux AS4/ES4 or Red Hat Enterprise Linux 5
/opt/DynamicLinkManager/bin/dlmmkinitrd
[-v]
[-f]
[-fstab fstab-name]
initrd-image
kernel-version
For SUSE LINUX Enterprise Server
/opt/DynamicLinkManager/bin/dlmmkinitrd
[-i initrd-image]
[-b boot-directory]
[-h]
Parameters
For Red Hat Enterprise Linux AS4/ES4 or Red Hat Enterprise Linux 5
-v
Utility Reference
7-33
Hitachi Dynamic Link Manager (for Linux®) User Guide