HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 503)

This file contains information related to errors that occurred during HDLM
installation. The following table describes the detailed information
contained in installgetras.tar.gz.
Table 7-10 Information Contained in installgetras.tar.gz
Output directory # File Description
output-directory-of-
collected-information-
specified-when-executing-
the- -installgetras-utility installgetras.log Log file of the
installgetras utility
/var/log messages OS syslog file
/var/tmp/hdlminstlog All subdirectories and
files
Log information
created during HDLM
installation
#
This directory is created in directory-to-which-collected-information-is-
output specified when the installgetras utility was executed.
installhdlm Utility for Installing HDLM
You can use this utility to perform a new installation, upgrade installation, or
re-installation of HDLM.
The utility can also be used to perform an unattended installation. An
unattended installation enables a user to install HDLM without entering
information. Before you perform an unattended installation, you must define
the information required for installation in the installation-information
settings file.
For details about how to perform an unattended installation, see Installing
HDLM on page 3-101 .
Format
mount-point-of-HDLM-installation-media/installhdlm [-v | -h | [-f
installation-information-settings-file-name | -update ] ]
Parameters
-v
Displays the version of HDLM to be installed.
-h
Displays the format of the installhdlm utility.
-f installation-information-settings-file-name
Specify this parameter when performing an unattended installation of
HDLM. Specify the installation-information settings file for this parameter.
Utility Reference
7-43
Hitachi Dynamic Link Manager (for Linux®) User Guide