HP Hitachi Dynamic Link Manager Software Licenses - Manual (Page 552)

Message ID Message Text Explanation
KAPL04054-I The owner controller will now be
revised. (number of LUs =
aa...aa)
Details
aa...aa: number of targeted LUs
Action
None.
KAPL04055-I The owner controller was
revised. (number of changed
LUs = aa...aa)
Details
aa...aa: number of changed LUs
Action
None.
KAPL04056-W The owner controller cannot be
revised because no paths are in
the Online status. (LU = aa...aa)
Details
aa...aa: ID (serial number + iLUN)
of the LU that was not revised
Action
Recover the paths from the
failure, and then place them in the
Online status, or exclude the LU
from dynamic I/O path control.
KAPL05001 to KAPL06000
Message ID Message Text Explanation
KAPL05003-I The HDLM driver (filter
component) was successfully
attached to Disk (aa...aa),
Partition (bb...bb).
Details
The path corresponding to disk
aa...aa and partition bb...bb was
successfully registered in the core
logic.
aa...aa: Disk sequence number
(decimal number)
bb...bb: Fixed at 0 (decimal
number)
Action
None.
KAPL05008-E Could not allocate memory.
(aa...aa:bb...bb) Execute the
DLMgetras utility to collect error
information, and then contact
your vendor or maintenance
company. Refer to the HDLM
User's Guide for instructions
how to execute the DLMgetras
utility.
Details
aa...aa: File ID, line number,
(hexadecimal number)
bb...bb: Memory capture size
(hexadecimal number)
Action
Execute the utility for setting
HDLM driver option (dlmsetopt)
and increase the number of retries
for allocating memory. For details
on the dlmsetopt utility, see
dlmsetopt Utility for Setting HDLM
Driver Options on page 7-37 .
Increase system memory. Stop
8-40
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide