HP Integrated Lights-Out 3 - Manual (Page 121)

•
Server Startup and Server Prefailure sequences are saved automatically in iLO memory. They
will be lost during firmware upgrades, iLO reset, and power loss. You can save the captured
video to your local drive by using the .NET IRC.
•
The Server Startup file starts capturing when server startup is detected, and stops when it runs
out of space. This file is overwritten each time the server starts.
•
The Server Prefailure file starts capturing when the Server Startup file is full, and stops when
iLO detects an ASR event. The Server Prefailure file is locked when iLO detects an ASR event.
The file is unlocked and can be overwritten after it is downloaded through the .NET IRC.
•
The Console Capture control buttons are located on the bottom of the .NET IRC session window.
Table 8 (page 121) explains the playback controls used for viewing a captured video.
Table 8 Playback controls
Function Name Control
Restarts playback from the beginning of the file Skip to Start
Pauses the playback Pause
Starts playback if the currently selected file is not
playing or is paused Play
Records your .NET IRC session Record
Shows the progress of the video session Progress Bar
Viewing Server Startup and Server Prefailure sequences
1. Start the .NET IRC.
2. Press the Play button.
The Playback Source dialog box opens, as shown in Figure 65 (page 121) .
Figure 65 Playback Source dialog box
3. Select Server Startup or Server Prefailure.
4. Click Start.
Saving Server Startup and Server Prefailure video files
1. Start the .NET IRC
2. Press the Play button.
3. Select Server Startup or Server Prefailure.
4. Click Start.
Using the Integrated Remote Console 121