Ilo rbsu, Ilo mobile app, Ilo scripting and command line – HP Integrated Lights-Out 3 User Manual
Page 13
For more information about iLO functionality and integration, see the following:
•
“Integrating HP Systems Insight Manager” (page 157)
•
“Directory services” (page 160)
•
iLO RBSU
You can use the iLO ROM-based setup utility to configure network parameters, global settings, and
user accounts. iLO RBSU is designed for the initial iLO setup, and is not intended for continued
iLO administration. iLO RBSU is available whenever the server is booted, and can be run remotely
through the Remote Console. Press F8 during POST to enter iLO RBSU.
You can disable iLO RBSU in the iLO RBSU Global Settings preferences or in the iLO web interface.
Disabling iLO RBSU prevents reconfiguration from the host unless the iLO Security Override Switch
is set.
For more information about using iLO RBSU, see the following:
•
“Setting up iLO by using iLO RBSU” (page 16)
•
•
“Using the iLO RBSU” (page 87)
iLO mobile app
The HP iLO mobile app provides access to the Remote Console of your HP ProLiant server from
your mobile device. The mobile app interacts directly with the iLO processor on HP ProLiant servers,
providing total control of the server at all times as long as the server is plugged in. For example,
you can access the server when it is in a healthy state or when it is powered off with a blank hard
drive. As an IT administrator, you can troubleshoot problems and perform software deployments
from almost anywhere.
For more information about the iLO mobile app, see
iLO scripting and command line
You can use the iLO scripting tools to configure multiple iLO systems, to incorporate a standard
configuration into the deployment process, and to control servers and subsystems.
The HP iLO Scripting and Command Line Guide describes the syntax and tools available to use
iLO 3 through a command line or scripted interface.
iLO RBSU
13