HP Integrated Lights-Out 3 User Manual
Page 68
1.
Navigate to the Administration
→Security→Login Security Banner page, as shown in
Figure 29 Security–Login Security Banner Settings page
2.
Select the Enable Login Security Banner check box.
iLO uses the following default text for the Login Security Banner:
This is a private system. It is to be used solely by authorized
users and may be monitored for all lawful purposes. By accessing
this system, you are consenting to such monitoring.
3.
Optional: To customize the security message, enter a custom message in the Security Message
text box.
The byte counter above the text box indicates the remaining number of bytes allowed for the
message. The maximum is 1,500 bytes.
TIP:
Click Use Default Message to restore the default text for the Login Security Banner.
68
Configuring iLO