HP Integrated Lights-Out 3 User Manual
Page 126
Advertising
9.
Select BIOS Serial Console & EMS, and then press Enter.
NOTE:
EMS is for Windows only.
10. Select BIOS Serial Console Port, and then press Enter.
11. Select the COM port that matches the value selected in
, and then press Enter, as shown
in
.
Figure 69 Configuring the BIOS Serial Console Port
12. Select BIOS Serial Console Baud Rate, and then press Enter.
13. Select 115200, and then press Enter, as shown in
.
126
Using iLO
Advertising